Yahoo Web Search

  1. Ads
    related to: tps sensor
  1. Hi It sounds as though the PCM thinks your foot is hard down, which could be due to a problem with the TPS. If it is a 3 pin TPS then you can check it with a volt meter. One pin will be earthed, one will read around 0...

    5 Answers · Cars & Transportation · 08/01/2012

  2. Let me guess. GM truck? Test the cam sensor . Its located in the distributor housing. I am...

    2 Answers · Cars & Transportation · 06/11/2011

  3. ask Acura

    2 Answers · Cars & Transportation · 24/04/2011

  4. ...throttle specs on that should be approx. .9 volts on the green wire at the tps . As you open the trottle to wide open with the car off, it should steadly move up...

    2 Answers · Cars & Transportation · 12/02/2007

  5. ... vehicle uses an Accelerator Pedal Position Sensor , which is down behind the gas pedal, which may be the part you have, but might not...

    7 Answers · Cars & Transportation · 07/05/2010

  6. ... never changed a tps sensor before. Mounted in grommet... sensor lever engages with the sensor drive lever on the throttle shaft... screws. the tps is auto zeroing and...

    2 Answers · Cars & Transportation · 21/05/2008

  7. There shouldn't be any adjustment after changing the TPS but the codes will have to be cleared from the computer.

    1 Answers · Cars & Transportation · 25/02/2012

  8. take it to Auto Zone or Advanced Auto Parts and have them run a diagnostic on it. It's free

    2 Answers · Cars & Transportation · 15/08/2011

  9. yes some vehicles you have to reset the tpms light after you rotate them, look in owners manual for reset procedure

    2 Answers · Cars & Transportation · 09/12/2009

  10. No, the added resistance will affect the computer.

    1 Answers · Cars & Transportation · 03/12/2011

  1. Ads
    related to: tps sensor
  1. Try asking your question on Yahoo Answers