Yahoo Web Search

  1. Sort by

  1. You could make something pretty easily that would stay on for at least a day. Go buy a sprinkler timer at the hardware store. Set it to run all day once a week. Hook up a 12 volt light to the terminal. I used to have a small pilot light inside my house that was powered by...

    3 Answers · Home & Garden · 03/08/2019

  2. The Drano will be fine to use. Let it sit overnight before flushing it away with a kettle of hot water. Any ammonia in the system will be minimal and have no effect at all on your chemical cleanser.

    6 Answers · Home & Garden · 15/11/2019

  3. That they are not smart

    13 Answers · Cars & Transportation · 03/02/2020

  4. Your neighbor and AAA uses manual labor. A repair shop will most likely use machines. A machine is a lot stronger than a human.

    15 Answers · Cars & Transportation · 04/07/2019

  5. That shuddering is the car on the edge of a stall. You wont harm the engine necessarily but you do put load into the drive train. There are bushes etc that absorb these forces but it's obviously best if you polish your driving style and...

    5 Answers · Cars & Transportation · 05/08/2019

  6. Not all Scan Tools are the same, OBD2 are the basic tools. Enhanced EOBD, and CAN capable scanners are more advanced and can do more.

    2 Answers · Cars & Transportation · 21/07/2019

  7. If this fridge has recently been stored\moved on it's side you need to unplug it and let it sit upright for 24 hours before powering it on.  You need to give it 24 hours plugged in to reach temperature.  Otherwise it...

    2 Answers · Home & Garden · 22/10/2019

  8. Call your local auto parts store and ask if they have a speed sensor pigtail for your year and model. That will be the plug with a short section of wire that you can spice to your existing wires. Pick up some heat shrink tubing and some electrical tape to...

    3 Answers · Cars & Transportation · 02/09/2019

  9. a master cylinder has a breather hole in it ..not big but big enough ..over time water vapour gets into the fluid ..when brakes are used hard they create a lot of heat ..i have the scars to prove it ..the heat can boil the brake fluid ..it expands and can empty the master...

    13 Answers · Cars & Transportation · 09/09/2019

  10. Try inserting the tiny extension nozzle on a can of WD40 into the lock and spraying it. Then work the lock mechanism back and forth with the key. This sometimes works and will only cost $6 to try. Otherwise, call a lock smith. They usually have the "slim...

    3 Answers · Cars & Transportation · 05/04/2019

  1. Try asking your question on Yahoo Answers