Yahoo Web Search

  1. ...owner put a whole in the fire wall to be able to use impact socket. To lock the engine use the flywheel area. Auto trans: use a 16-17 mm socket on torque converter bolt. Manual trans: use a large screwdriver from...

    2 Answers · Cars & Transportation · 25/11/2008

  2. ...389 with 4.1225- inch (104.71 mm ) bore and 3.75- inch (95 mm ) stroke 400.4 cu in (6,561 cc). It replaced...engine apart thinking I was going to bore it out and put new pistons in it and...

    2 Answers · Cars & Transportation · 09/10/2013

  3. ...otherwise, it's not going to accelerate. Change the converter so that you have at least 4000 flash stall. Try a 245 MM converter with a #5 pump and a... of 10 inch high stall converters ...

    3 Answers · Cars & Transportation · 01/03/2010

  4. ... to -lock 2.4 Turning circle, curb- to -curb (ft / m) 37.4 / 11.3 Brakes... Rotor diameter (in / mm ) front 11.7 / 297 rear 10.5 / 270... Wheel size & type 16- inch steel, 16- inch 5-spoke aluminum...

    6 Answers · Cars & Transportation · 19/04/2011

  5. ... to -lock 2.9 Turning circle, curb to curb (ft / m) 36.3 / 11.1 Brakes... diameter x thickness (in / mm ) front: 10.9 x 1.02 / 274 x 25 rear 8... wheels 15- inch x 6- inch bolt on full wheel cover 15- inch ...

    3 Answers · Cars & Transportation · 27/02/2011

  6. ...sure are not going to get ANYWHERE near that with...not a 400. Then build a 245 MM converter , use a 082 stator and a #4 bowl...39;ll never have an efficient 10 inch convertor work well on the street with...

    7 Answers · Cars & Transportation · 20/03/2012

  7. ...all around street car that is that heavy. It needs a 245 MM converter with a 082 or 086 stator in it and a #4 pump. then set the turbine clearance to the housing at about .030-.050 Shoot me an email...

    7 Answers · Cars & Transportation · 25/11/2010

  1. Try asking your question on Yahoo Answers