Perform the procedures in the below links. These are relatively simple things you can do yourself and all you'll need is a can of carburetor cleaner, a couple hours of your time and some basic hand tools. A...
2 Answers · Cars & Transportation · 17/09/2013
if the cable broke at the handle inside the car just cut enough of the cable housing away to expose the remaining cable and pull it with a pair of pliers or reach through the grill with a long pair of pliers and grab the cable their and try to yank it open
5 Answers · Cars & Transportation · 10/04/2009
Without knowing the engines in each vehicle (8th digit in VIN #) it is difficult to give you an accurate answer. 94 could be a transitional year but the best thing to do is check your local parts store. If the pump is the same part...
4 Answers · Cars & Transportation · 28/09/2008
Go to www.autozone.com look at the repair section
5 Answers · Cars & Transportation · 08/02/2007
Go to a junk yard.
1 Answers · Cars & Transportation · 27/02/2013
would You please check if You have the car in parking position (automatic transmission control shifter) in case of manual transmission depress the clutch pedal while tuening the key to start. if nothing like it,then check the fuses on the box ,the one that say <ignition .> under dash left of the...
4 Answers · Cars & Transportation · 24/10/2011
Only at the dealer. and its not a chip its a resistor.
4 Answers · Cars & Transportation · 06/06/2008
If it lugs down and stalls when stopping after getting hot, then it very likely is the transmission torque converter solenoid sticking. The shifter probably says P R N D 2 1. If so it is a 3 speed auto...
2 Answers · Cars & Transportation · 11/09/2007