Yahoo Web Search

  1. Sort by

  1. take off the air intake hose, and its on the right side of the throttle body if your standing in front of the truck looking at the engine. its right under where the throttle cable connects to the throttle body, two screws hold it on, you might need a stubby screw driver to access the rear...

    1 Answers · Cars & Transportation · 21/06/2012

  2. It contributes to the calculations about load, signaled by other sensors. It tells the EEC how far open the throttle body is. Signal voltage increases with movement of the throttle blade shaft. Failures...

    1 Answers · Cars & Transportation · 10/08/2013

  3. check voltage values for tps many are slightly adjustible. see service manual for voltage specs and adjustment. tps is typicaly 0-5v range with a perticular voltage at closed throttle (hot engine) use digital meter type only!! test incoming voltage supply and output voltage returning...

    3 Answers · Cars & Transportation · 28/12/2007

  4. try your mechanic

    1 Answers · Cars & Transportation · 29/09/2006

  5. I would check for any leaks in the system

    1 Answers · Cars & Transportation · 22/11/2010

  6. Spray it wherever you want to clean, it is only solvent no matter the label. Keep in mind to wipe residue off the sensors before reinstalling.

    2 Answers · Cars & Transportation · 10/06/2015

  7. Perhaps a weak coil or dirty injectors but a shop like Precision Tune can run a diagnostic on the machine and tell you how those are doing for around 60 bucks..

    2 Answers · Cars & Transportation · 30/08/2012

  8. The throttle position sensor is connected to the side of the throttle-body it has a wiring harness connected to it.

    2 Answers · Cars & Transportation · 31/10/2011

  9. It won't run well and it will shift poorly, but it won't do any damage.

    3 Answers · Cars & Transportation · 26/12/2016


    1 Answers · Cars & Transportation · 19/07/2010

  1. Try asking your question on Yahoo Answers