Yahoo Web Search

  1. Sort by

  1. I would check for any leaks in the system

    1 Answers · Cars & Transportation · 22/11/2010

  2. between 6-9 tenths of a volt. just be sure that the throat and throttle blade are clean and that the closed throttle hard stop is ok also check for binding in the linkage before checking voltage or replacing T.P.S..once done you may have to drive it...

    1 Answers · Cars & Transportation · 10/05/2008

  3. Spray it wherever you want to clean, it is only solvent no matter the label. Keep in mind to wipe residue off the sensors before reinstalling.

    2 Answers · Cars & Transportation · 10/06/2015

  4. It will be mounted on the side of the throttle body on the opposite side of were the throttle cable is connected. It will be the small black thing held on with 2 screws and a plug with 3 wires.

    1 Answers · Cars & Transportation · 01/01/2014

  5. take off the air intake hose, and its on the right side of the throttle body if your standing in front of the truck looking at the engine. its right under where the throttle cable connects to the throttle body, two screws hold it on, you might need a stubby screw driver to access the rear...

    1 Answers · Cars & Transportation · 21/06/2012

  6. It won't run well and it will shift poorly, but it won't do any damage.

    3 Answers · Cars & Transportation · 26/12/2016

  7. then it is a bad iac. common on mustangs. to the other guy; yes it is fuel injected. fuel injection in mustangs started in 86.

    4 Answers · Cars & Transportation · 28/03/2009

  8. Malfunctioning or incorrect PCV valve would be my first guess. Maybe need a valve with a different vacuum weight?

    3 Answers · Cars & Transportation · 06/02/2014


    1 Answers · Cars & Transportation · 19/07/2010

  1. Ad
    related to TPS
  1. Try asking your question on Yahoo Answers